An Honest Rundown of Real Mini Split Brands in Austin
Updated September 2026
Most Austin homeowners do not need a brand lecture. They need a ductless mini split that cools hard through a Central Texas summer, heats on the few cold mornings we get, and does not turn into a surprise bill. This page is a straight rundown of the brands you will see when you shop: Mitsubishi, Daikin, Fujitsu, LG, Senville, MRCOOL, and Pioneer.
Old West Minisplits installs ductless mini splits at flat posted prices: $2,000 for one zone, $3,700 for two zones, and $5,400 for three zones. That includes equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, and a Home Depot run for touch-up paint. We serve Austin and the I-35 corridor from Waco/Killeen down to San Antonio at the same flat pricing.
The brands people actually ask about
Mitsubishi, Daikin, Fujitsu, and LG are established names you will see in dealer programs and supply houses across Texas. Senville, MRCOOL, and Pioneer are sold heavily online and tend to show up in DIY shopping searches. All of them make ductless heat pumps that can cool and heat a zone. The difference in your house usually comes down to how the equipment is sized, mounted, piped, wired, and supported after install, not just the badge on the front.
What matters more than the brand
A ductless mini split is a heat pump. It moves heat instead of burning fuel, so it cools through brutal Central Texas summers and handles our mild winters without a furnace. Window units and portable ACs are cheap upfront but cool one room loudly, block a window, drip condensate, and are far less efficient. The best brand selection will still disappoint if the line set is kinked, the flare connections leak, the drain is not pitched, or the unit is oversized. An honest installer will tell you when a long line set, an existing panel upgrade, or difficult mounting will change the job before work starts.
How Old West Minisplits fits the decision
We keep the pricing flat and posted so you can compare brands and zone counts without sitting through a custom quote. One zone is $2,000, two zones is $3,700, and three zones is $5,400. Equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, and a Home Depot run for touch-up paint are included. There are no trip fees or surprise add-ons. If your job needs a very long line set, a panel upgrade the house already needed, or unusually difficult mounting, we tell you up front, never after.
How we compare
| Factor | Old West Minisplits | The usual |
|---|---|---|
| Installed price | $2,000 for one zone, $3,700 for two zones, $5,400 for three zones | Commonly $3,000 to $6,000 per zone on a custom quote |
| Quote process | Flat posted pricing with no in-home sales visit required to get a price | Most local HVAC contractors are quote-based and require an in-home sales visit |
| What is included | Equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, and a Home Depot run for touch-up paint | Line item quotes vary; standard electrical, cleanup, or touch-up paint may not be included unless specified |
| Exceptions | Stated up front: very long line set, panel upgrade the house already needed, or unusually difficult mounting | Custom quotes may not state all exclusions until the site visit or contract |
| Service area | Austin and the I-35 corridor, north to Waco/Killeen and south to San Antonio, same flat pricing | Service area and travel pricing can vary by contractor |
Straight answers
Which brand is the best mini split?
There is no single best brand for every Austin house. Mitsubishi, Daikin, Fujitsu, LG, Senville, MRCOOL, and Pioneer all make ductless heat pumps. The install quality, sizing, and support plan matter as much as the brand name. We would rather put a properly installed mid-range unit in the right spot than a premium unit on a sloppy line set.
Does Old West Minisplits install every brand listed here?
We keep pricing flat by keeping the job scope clear. We will give you a straight answer on equipment availability and what fits your zone count and layout before you commit. The posted price includes equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, and a Home Depot run for touch-up paint.
Are mini splits really enough for Texas heat?
Yes. Mini splits are heat pumps, so they are designed to cool through brutal Central Texas summers and handle our mild winters without a furnace. The key is correct sizing and a clean install, not a bigger furnace or duct system.
Why is Old West Minisplits priced lower than the custom quotes I have seen?
Ductless installs in Central Texas commonly run $3,000 to $6,000 per zone on a custom quote, and most local HVAC contractors are quote-based with an in-home sales visit. Old West Minisplits posts flat installed prices of $2,000 for one zone, $3,700 for two zones, and $5,400 for three zones. We avoid the sales visit and surprise add-ons, and we tell you up front about exceptions like a very long line set, a panel upgrade the house already needed, or unusually difficult mounting.
Get the number today
No walkthrough, no sales pitch. Tell us the rooms and we'll tell you the price.
Get My Flat Price