Does the flat price include the electrical work and the pad for the outdoor unit?

Yes. The flat price of $2,000 for one zone, $3,700 for two, or $5,400 for three covers the complete installation. That means the dedicated circuit run from the panel to the disconnect box, the outdoor composite equipment pad, the line set, the wall penetration, the mounting hardware, and all labor. We do not tack on a separate electrical charge after the fact. The only exception would be if your panel needs a major upgrade to accommodate the new breaker, which is rare in 78704 homes, and we would discuss that with you before any work begins.

How long does a typical install take in Austin?

A single-zone install in a 78704 home usually takes between four and six hours from arrival to cleanup. A two-zone system at $3,700 typically runs a full eight-hour day. A three-zone install at $5,400 may take a day and a half depending on the layout and how far apart the indoor heads are located. We will give you a clear timeframe when we confirm your date so you can plan around it. The crew works efficiently and cleans up thoroughly before they leave.

Can these units heat as well as cool?

They can. Every mini split we install in Austin is a heat pump, which means it reverses the refrigeration cycle to provide heat when outdoor temperatures drop. They work well for the mild winter weather we get in Central Texas and are a great way to take the edge off a chilly morning without firing up a whole central furnace. They are not a substitute for a primary heating system in extremely cold climates, but for 78704 winters, they handle the job just fine.

Do I need to pull a permit for a mini split install in 78704?

The City of Austin generally requires a mechanical and electrical permit for a ductless mini split installation. Old West Minisplits pulls the necessary permits as part of the job. The flat price you see, $2,000 for one zone, $3,700 for two, or $5,400 for three, includes the permit fees within the Austin city limits. We handle the paperwork and schedule the inspection if one is required. You do not need to chase anything down at the city offices.

What if I want a mini split in a detached garage or casita?

We install in detached structures all the time around 78704. A single-zone system at $2,000 is a popular choice for a garage workshop or a backyard casita. The install process is the same: we mount the indoor head on an exterior wall, set the outdoor condenser on a pad next to the structure, and run the electrical from the nearest panel. If the detached building has its own subpanel, we tie in there. If not, we run the circuit from the main house panel, and the flat price still covers it.

ZIP 76710 · Waco, Texas

Mini Split Installation in Waco, TX 76710

Updated October 2026

Old West Minisplits installs ductless mini splits in 76710 and across McLennan County at a posted price. One zone is $2,000 installed, two zones $3,700, three zones $5,400. No in-home sales visit to get a number.

$2,000One zone

$3,700Two zones

$5,400Three zones

Older homes, rooms the ducts never reached

About 79% of the homes in 76710 were built before 1980, and the typical house dates to 1969. Houses from that era often have small duct runs, add-ons and converted garages that the central system was never sized for.

A ductless mini split skips the ductwork entirely. One indoor head, a line set through the wall, and the room finally holds temperature.

Heat and cool from the same unit

About 43% of homes in 76710 heat with gas. A mini split doesn't replace that furnace; it adds year-round comfort to the rooms the furnace and AC don't reach, with heating built in for cold snaps.

Every unit we install is a heat pump, so the room you add it to stays comfortable in January too.

Rentals and investors

Roughly 54% of occupied homes in 76710 are rented. For landlords a mini split is a fixed, posted cost per room: no tenant downtime for ductwork, and most installs are done in a day.

Landlords with several units can send the list and get every price in one reply.

What it costs here

The median home value in 76710 is about $229,000. The install price doesn't move with it: One zone is $2,000 installed, two zones $3,700, three zones $5,400. Equipment, labor, line set, standard electrical and a touch-up paint run are included. Financing is available on approved credit for two-zone jobs and up: see the full terms.

By the numbers

Housing in 76710 at a glance

About 12,391 homes
Typical home built: 1969
Built before 1980: 79%
Built 2010 or later: 5%
Heated with electricity: 57%
Owner-occupied: 46%

Housing figures: U.S. Census Bureau, American Community Survey 2019-2023 5-year estimates, ZIP Code Tabulation Area 76710. Figures are estimates for the whole ZIP, not any one street.

The map

Where 76710 sits

Questions

Straight answers for Waco

How much does a mini split cost in 76710?

One zone is $2,000 installed, two zones $3,700, three zones $5,400. That is the posted price, not a starting estimate.

Do you charge extra to come to Waco?

No. The same posted price applies across our service area, with no trip fee.

Will it heat in winter?

Yes. Every mini split we install is a heat pump, so it heats and cools from the same unit.

How fast can you install?

Usually the same week, and most one to three zone jobs finish in a single day.

Do I need ductwork?

No. A ductless mini split needs only a small opening through the wall for the line set.

Get the number today

Tell us the rooms. The flat price comes back, usually the same day.

Get My Flat Price