Mini Split Installation in Hyde Park, Austin, Flat Price from $2,000
Updated September 2026
If you live in Hyde Park, you know the drill. An older home with no ductwork, a garage you want to turn into a workspace, or a sunroom that bakes in the Texas sun. Central Texas heat is brutal, and window units or portable ACs just don't cut it. They block a window, drip condensate, and run inefficiently. A ductless mini split heat pump solves that: it cools reliably through our 100 degree summers and handles our mild winters without a furnace. But finding a contractor who gives a straight price without a sales pitch is rare.
Most HVAC contractors in Hyde Park operate on custom quotes. They send someone to your house, measure, talk for an hour, then email a number that can range from $3,000 to $6,000 per zone. Old West Minisplits does it different. We post flat installed prices right on our site: $2,000 for one zone, $3,700 for two, $5,400 for three. That includes equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, and even a Home Depot run for touch-up paint. No trip fees, no surprise add-ons. We serve the whole I-35 corridor from Waco to San Antonio at the same flat pricing.
What the Flat Price Covers (and What Doesn't)
The $2,000 per zone price is all-in for a standard installation. It includes the mini split heat pump unit, indoor air handler, line set, wiring, breaker, refrigerant, a condensate pump if needed, testing, and cleanup. We also make a trip to Home Depot for paint to match the wall after we run the lineset. There are no trip fees or hidden charges.
We tell you three honest exceptions before you commit, never after. A very long line set (over 50 feet) adds a materials charge. A panel upgrade that your house already needed is not included. Unusually difficult mounting, like brick or stone that requires special anchors, may add a small fee. We tell you upfront so you can decide. If your system breaks down later, we do not offer repair or warranty service. But if you are chasing repairs on a failing or poorly installed unit, getting a flat-price new install quote is often the smarter move.
Typical Hyde Park Jobs: Casitas, Garages, Additions, and Older Homes
Hyde Park is full of older homes with no central ductwork. Common projects we see: converting a detached garage into a home gym or office, adding a mini split to a casita or guest house, cooling a second-floor addition that was never tied into the main system, or putting a single zone in a master bedroom to get away from a window unit. Many homeowners also use mini splits to cool a sunroom or a home addition without extending ductwork.
Because mini splits are heat pumps, they work for both seasons. They pump heat into the house during our mild Central Texas winters and pull it out during the summer. No furnace needed. The installation is clean and quiet. And because our pricing is flat, you know exactly what you are paying before we start.
Why Flat Pricing Matters in Austin
Most local HVAC contractors use a quote-based model. They come to your house, measure, and then send a custom bid. That process takes time and often includes a sales pitch. Prices vary widely, and you might not know the final number until the job is done. Old West Minisplits posts the price upfront. You can see it on the website, get a quote online, and schedule without a home visit. The same flat pricing applies all along the I-35 corridor from Waco to San Antonio, not just Hyde Park.
If you need a single zone for a garage or two zones for a main floor, the price is the same whether you live in Hyde Park, North Austin, or San Marcos. No surprises. No extra fees for travel. Just a straightforward installation.
How we compare
| Factor | Old West Minisplits | The usual |
|---|---|---|
| Pricing model | Flat price posted online, no custom quote needed | Custom quote after in-home visit, price varies per job |
| Home visit required | No, you can get a quote online and schedule remotely | Yes, most require a salesperson to come measure |
| Price per zone | $2,000 for 1 zone, $3,700 for 2, $5,400 for 3 | $3,000 to $6,000 per zone on average for a custom install |
| Included items | Equipment, labor, lineset, standard electrical, refrigerant, testing, cleanup, paint touch-up | Varies; some include lineset and refrigerant, some add charges for electrical or disposal |
| Surprise fees | None, we list the three exceptions before you agree | Common: trip fees, after-hours surcharges, extra for long lineset or difficult mounting |
Straight answers
How much does a mini split cost in Hyde Park?
Our flat installed price is $2,000 for one zone, $3,700 for two zones, and $5,400 for three zones. That covers everything for a standard installation. Most quote-based contractors in the area charge $3,000 to $6,000 per zone for a custom install.
Do I need ductwork for a mini split?
No. Mini splits are ductless. They connect an outdoor unit to one or more indoor units with a small refrigerant line. That makes them ideal for homes without existing ductwork, like many older Hyde Park houses, garages, or additions.
How do I schedule an installation?
Go to our website and fill out the quote form. We will review your needs and send you a confirmation. No phone calls needed. We do not list a phone number, so the form is the way to get started.
What if my home needs electrical work?
Standard electrical work is included in the flat price: a dedicated circuit, breaker, and wiring to the unit. If your home needs a panel upgrade that it already needed (for example, an old fuse box), that is not included. We tell you before you agree so there are no surprises.
Get the number today
No walkthrough, no sales pitch. Tell us the rooms and we'll tell you the price.
Get My Flat Price