Flat-Price Ductless Mini Split Installation in Nolanville, TX
Updated September 2026
Nolanville sits in Bell County, north of the Austin I-35 corridor and right in the path of Central Texas heat that starts early and stays late. If you have a hot garage, a casita, a room addition, or an older home that never had ductwork, a ductless mini split can cool that space without tearing up walls. Old West Minisplits installs ductless mini splits in Nolanville at a posted flat price.
A one-zone system is $2,000, a two-zone system is $3,700, and a three-zone system is $5,400. That flat installed price covers the job and is the same from San Antonio north to Waco and Killeen, including the whole Austin I-35 corridor. Start with the quote form on this page and get a real number.
What the flat price covers in Nolanville
Every Old West Minisplits installation includes the equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, and a Home Depot run for touch-up paint. There are no trip fees and no surprise add-ons. The only exceptions are a very long line set, a panel upgrade the house already needed, or unusually difficult mounting. We tell you about those up front, never after the work begins.
Typical Nolanville jobs
Most of our Nolanville work fits the same pattern: a garage that gets too hot to use, a casita or guest suite, a room addition, or an older Bell County home with no central ductwork. A one-zone unit handles one open room or a small casita. Two and three zone systems give you independent control in a couple of rooms. Mini splits are heat pumps, so they cool through brutal summers and handle our mild winters without a furnace. They are not a window unit or portable AC that cools one room loudly, blocks a window, and drips condensate.
Why flat price matters here
Most local HVAC contractors use custom quotes and an in-home sales visit before you hear a number. Ductless installs in Central Texas commonly run $3,000 to $6,000 per zone. Old West Minisplits posts the price instead. You know what a one-zone, two-zone, or three-zone system costs before you use the quote form. The price stays the same across the Austin I-35 corridor from San Antonio to Waco and Killeen.
How we compare
| Factor | Old West Minisplits | The usual |
|---|---|---|
| How pricing works | Posted flat rates: $2,000 for one zone, $3,700 for two zones, $5,400 for three zones. | Most local HVAC contractors are quote-based and require an in-home sales visit. |
| What the base price includes | Equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, and a Home Depot run for touch-up paint. | Inclusions vary by contractor and depend on a custom quote. |
| Local price range | Flat $2,000 to $5,400 total for one to three zones. | Ductless installs in Central Texas commonly run $3,000 to $6,000 per zone. |
| Exceptions and add-ons | Very long line set, panel upgrade the house already needed, or unusually difficult mounting, stated up front before work begins. | Most quote-based contractors build unusual conditions into a custom quote after the in-home visit. |
| Service area pricing | Same flat pricing corridor-wide from San Antonio to Waco and Killeen, including Nolanville. | Most contractors price per job rather than posting one corridor-wide flat rate. |
Straight answers
How much does a mini split cost in Nolanville?
Old West Minisplits posts flat installed prices. A one-zone system is $2,000, a two-zone system is $3,700, and a three-zone system is $5,400. The price includes equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, and a Home Depot run for touch-up paint. The only exceptions are a very long line set, a panel upgrade the house already needed, or unusually difficult mounting, and we state those up front. For comparison, ductless installs in Central Texas commonly run $3,000 to $6,000 per zone on a custom quote.
Do I need ductwork for a mini split in an older Nolanville home?
No. Ductless mini splits use a small outdoor unit connected to one or more indoor heads by a refrigerant line set. That makes them a good fit for older Bell County homes without ducts, garages, casitas, room additions, and bonus rooms. You do not need to cut into walls or add a furnace.
Do you repair existing mini splits or HVAC systems?
Old West Minisplits is flat-price new installation, not repair, warranty service, or maintenance. If your current unit is malfunctioning, start with the basics: check the breaker, clean or replace the filter, clear the condensate drain, and make sure the thermostat setpoint is correct. If the system is aging, failing, or was poorly installed, replacing it through the flat-price quote form on this page is often a better use of money than chasing repairs on an old unit.
How does scheduling and installation work?
Start with the quote form on this page. Tell us the zone count and location, and we confirm the flat price and any possible exceptions like a long line set, a panel upgrade, or difficult mounting. From there we schedule the install. The flat price is the same across the Austin I-35 corridor from San Antonio to Waco and Killeen.
Get the number today
No walkthrough, no sales pitch. Tell us the rooms and we'll tell you the price.
Get My Flat Price