Ductless Mini Split Installation in Pflugerville, Flat Price, No Surprises
Updated September 2026
Living in Pflugerville, you know the deal: Central Texas summers hit triple digits and stay there, and a lot of the homes around here were built before ductwork was standard in every room. Whether it's a garage conversion, a casita out back, a new addition, or just an older house with window units in every bedroom, you've been looking for real cooling without tearing open walls or spending a week waiting on bids.
Old West Minisplits is a straight-up ductless mini split installer. We serve Pflugerville and the entire I-35 corridor from Austin north to Waco and south to San Antonio. Our prices are flat, posted online, no guessing, no markup for your zip code. One zone is $2,000. Two zones is $3,700. Three zones is $5,400. That includes equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, and even a run to Home Depot for touch-up paint. No trip fees. No surprise add-ons. We tell you the honest exceptions up front: a very long line set, a panel upgrade your house already needed, or an unusually difficult mounting. That's it.
What the Flat Price Covers, Everything You Need
Most local HVAC contractors work on a custom quote basis. They send a salesperson to your house, measure a few things, and send you a number that can shift once the crew shows up. Our $2,000 per zone price is the number. It covers the indoor wall-mounted unit, the outdoor condenser, the line set connecting them, standard electrical work (up to a 50-foot line set and a dedicated breaker in an existing panel), refrigerant charge, full system testing, and a thorough cleanup afterward. If we leave a smudge on the wall, we're making a paint run on the way home. No trip fees, no fuel surcharges, no 'that tree makes it hard to set the pad' upcharge.
Typical Pflugerville Jobs We Handle
Pflugerville homes run the gamut, 1980s track houses with no attic ductwork, new-build garages that were never meant to be livable, multi-purpose rooms over detached sheds, and front bedrooms that turn into saunas by 3 p.m. We've mounted units in all of them. A common setup is a two-zone system for a three-bedroom house where the existing central AC can't keep up with the back addition. Another is a single-zone in a converted garage workshop where a window unit just won't cut it anymore. Because mini splits are heat pumps, they also handle our mild winters, no separate furnace needed. You set the remote, and the system reverses cycle to warm the room when a blue norther blows through.
Why Flat Price Beats the Traditional HVAC Model
Ductless mini split installs in Central Texas commonly run $3,000 to $6,000 per zone on a custom quote. Most contractors are quote-based and require an in-home sales visit before they'll even give you a number. That visit often turns into a pitch for financing, service plans, or add-ons you didn't ask for. Old West Minisplits posts the price online, one zone $2,000, two zones $3,700, three zones $5,400, and that's what you pay, provided your install doesn't fall into one of the three honest exceptions we tell you about before you book. No in-home sales pitch. No dog-and-pony show. Just a clean install at a price you already know.
How we compare
| Factor | Old West Minisplits | The usual |
|---|---|---|
| Pricing model | Flat price posted online, 1 zone $2,000, 2 zones $3,700, 3 zones $5,400 | Custom quote, typically $3,000-$6,000 per zone, varies by contractor |
| In-home visit required | No in-home sales visit needed. Price is set online. | Most require an in-home visit before providing a quote |
| Surprise add-ons | None. Exceptions told upfront: long line set, panel upgrade, difficult mount. | Add-ons for line set length, electrical, paint touch-up, and trip fees are common |
| Service area | Flat pricing from Austin north to Waco/Killeen, south to San Antonio | Service area varies, often with distance-based trip fees |
| What's included | Equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, paint | Often equipment and labor only; electrical, paint, and cleanup may be extra |
Straight answers
How much does a mini split cost in Pflugerville?
For a flat-price install from Old West Minisplits, one zone is $2,000, two zones are $3,700, and three zones are $5,400. That includes equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, and touch-up paint. No trip fees or surprise add-ons.
Do mini splits work in Texas winters?
Yes. Mini splits are heat pumps, so they reverse cycle to provide heat when temperatures drop. They handle Central Texas winters, including the occasional freeze, without needing a separate furnace. Below about 15°F efficiency drops, but that's rare here.
How do I schedule an install?
Go to minispli.com and select your zone count. You'll see the flat price immediately. From there you can book a time slot, no phone tag, no in-home sales visit required. If your install involves one of the three honest exceptions (very long line set, needed panel upgrade, or difficult mounting), we'll let you know before the crew arrives.
Why shouldn't I just buy a window unit or portable AC instead?
Window units and portable ACs are cheap upfront, often $200 to $600, but they cool one room loudly, block a window, drip condensate outside, and use more electricity per BTU than a mini split. A mini splits is quieter, more efficient, mounts on the wall, and uses a small hole for the line set. Over a few Texas summers, the higher upfront cost pays for itself in lower electric bills and better comfort.
Get the number today
No walkthrough, no sales pitch. Tell us the rooms and we'll tell you the price.
Get My Flat Price