Mini Split Installation in Rosedale, Austin, Flat Price from $2,000
Updated September 2026
Rosedale is one of central Austin's older, established neighborhoods, full of bungalows built between the 1930s and 1950s under a heavy tree canopy that softens the Texas sun but does not solve the cooling problem on its own. It is a longer trip to the University of Texas than West Campus or Hyde Park, but it remains popular with grad students and faculty who commute by bike or bus, and its small-footprint homes with detached garages are common candidates for additions and garage conversions that were never wired into central air.
Old West Minisplits' flat pricing applies the same in Rosedale as anywhere else in our service area: $2,000 for one zone, $3,700 for two zones, $5,400 for three zones, covering equipment, labor, line set, standard electrical, refrigerant, testing, and cleanup. Request the quote through the form on our homepage. No home visit, no phone call, since we do not publish a phone number.
What the Flat Price Covers (and What It Doesn't)
The $2,000 per zone price is all-in for a standard installation. It includes the mini split heat pump unit, indoor air handler, line set, wiring, breaker, refrigerant, a condensate pump if needed, testing, and cleanup. We also make a trip to the hardware store for paint to match the wall after we run the line set. There are no trip fees or hidden charges.
We tell you three honest exceptions before you commit, never after. A very long line set, over 50 feet, adds a materials charge. A panel upgrade that the house already needed is not included. Unusually difficult mounting, like brick or stone that requires special anchors, may add a small fee. We tell you upfront so you can decide. If your system breaks down later, we do not offer repair or warranty service. But if you are chasing repairs on a failing or poorly installed unit, getting a flat-price new install quote is often the smarter move.
Typical Rosedale Jobs: Bungalow Additions and Detached Garage Conversions
Rosedale's older bungalows often have a back addition, a converted sleeping porch, or a small guest bedroom that was added on at some point without ever being tied into the home's original cooling. A single mini split zone handles that kind of add-on cleanly, without opening up ceilings to extend ductwork that may not even exist in the main house.
The detached garages common on Rosedale's older lots are also a frequent project, whether the goal is a home office, a workshop, or a guest suite for a grad student tenant. Since a detached garage has no connection to the house's electrical or cooling system at all, a mini split with its own dedicated circuit is usually the simplest way to make the space usable year-round.
Why Flat Pricing Matters Near Campus
Most local HVAC contractors work off a custom quote. Someone visits, measures, and eventually emails a number, and that number can land anywhere from $3,000 to $6,000 per zone depending on who shows up and how the conversation goes. Old West Minisplits skips that. The price is posted on the site, you can request a quote without waiting for a home visit, and you can schedule an install date without ever picking up the phone, because we do not list one. The form on our homepage is the way in.
Whether the address is in Rosedale or anywhere else along the I-35 corridor between Waco and San Antonio, the price per zone does not change. One zone is $2,000, two zones is $3,700, three zones is $5,400. No travel surcharge for being close to campus, no discount for being farther away, just one flat number.
How we compare
| Factor | Old West Minisplits | The usual |
|---|---|---|
| Pricing model | Flat price posted online, no custom quote needed | Custom quote after in-home visit, price varies per job |
| Home visit required | No, you can get a quote online and schedule remotely | Yes, most require a salesperson to come measure |
| Price per zone | $2,000 for 1 zone, $3,700 for 2, $5,400 for 3 | $3,000 to $6,000 per zone on average for a custom install |
| Included items | Equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, paint touch-up | Varies; some include line set and refrigerant, some add charges for electrical or disposal |
| Surprise fees | None, we list the three exceptions before you agree | Common: trip fees, after-hours surcharges, extra for long line set or difficult mounting |
Straight answers
How much does a mini split cost in Rosedale?
Our flat installed price is $2,000 for one zone, $3,700 for two zones, and $5,400 for three zones. That covers a standard installation from start to finish. Most quote-based contractors serving Rosedale charge $3,000 to $6,000 per zone for a custom install.
Do I need ductwork for a mini split?
No. Mini splits are ductless. They connect an outdoor condenser to one or more indoor units with a small refrigerant line, which is why they work so well in Rosedale, where a lot of the housing stock was never built with central ducts.
How do I schedule an installation?
Go to our website and fill out the quote form. We review the details and send a confirmation. No phone calls needed, we do not list a phone number, so the form is the way to get started.
What if the property needs electrical work?
Standard electrical work is included in the flat price: a dedicated circuit, breaker, and wiring to the unit. If the property needs a panel upgrade it already needed for other reasons, for example an old fuse box, that is not included. We tell you before you agree so there are no surprises.
Can a mini split cool a detached garage that has no existing electrical or cooling connection to the house?
Yes. A dedicated circuit and breaker for the mini split are included in our flat price, so a detached garage with no existing HVAC connection is a standard job, not a special case.
My Rosedale bungalow has an addition that was never tied into central air. Can that be its own zone?
Yes. A single mini split zone is a common fix for an addition or converted room that was never connected to the main house's cooling, and it does not require extending any existing ductwork.
Get the number today
No walkthrough, no sales pitch. Tell us the rooms and we'll tell you the price.
Get My Flat Price