Flat-Price Mini Split Installs in Schertz, Texas, $2,000 per Zone
Updated September 2026
Schertz summers hit hard, especially in garages, casitas, or older homes without ductwork. A ductless mini split keeps those spaces cool without the cost or mess of adding vents. Most local HVAC contractors want an in-home sales visit and a custom quote that runs $3,000-$6,000 per zone. We post flat prices up front so you can decide before we step on your property.
Old West Minisplits serves Guadalupe County and the I-35 corridor from Waco to San Antonio. Same $2,000 per zone whether you’re cooling a single room or adding three zones to a new addition. No trip fees, no surprise add-ons, just honest pricing for honest work.
What’s Included in the Flat Price
Every install covers the same list of items. You get the indoor wall unit, the outdoor condenser, a 15-foot line set, standard electrical work, refrigerant, testing, cleanup, and a Home Depot run for touch-up paint to match your walls. Labor is included, so the price you see is the price you pay unless the job has one of three honest exceptions we tell you about up front: a very long line set, a panel upgrade your house already needed, or unusually difficult mounting.
We don’t nickel-and-dime for basic setup. If your Schertz home fits the standard install, the price stays flat.
Common Schertz Jobs We Handle
Guadalupe County homes often need cooling solutions that don’t require ductwork. We see a lot of garage conversions, casitas, sunrooms, and older homes where adding vents isn’t practical. A single-zone mini split at $2,000 is a straightforward way to cool a 300-500 sq ft space without blocking a window or dealing with the noise and inefficiency of a window unit.
For larger additions or multi-room setups, two or three zones at $3,700 or $5,400 cover most needs. These systems are heat pumps, so they handle our mild winters too, no furnace required.
Why Ductless Over Window Units or Portable ACs
Window units and portable ACs are cheap upfront but come with trade-offs. They cool one room loudly, block a window, drip condensate, and cost more to run over time. A mini split is quieter, more efficient, and doesn’t take up window space. It also lasts longer and requires less maintenance than a portable unit.
If you’re tired of swapping out window units every summer or dealing with the hassle of a portable AC, a flat-price mini split install is a cleaner, more permanent solution.
How we compare
| Factor | Old West Minisplits | The usual |
|---|---|---|
| Pricing model | Flat price posted online: $2,000 per zone | Custom quote after in-home sales visit |
| Price range per zone | $2,000 | $3,000-$6,000 |
| Trip fees or add-ons | None for standard installs | Common, often not disclosed up front |
| Scheduling | Book online, no sales visit required | In-home consultation before pricing |
| Service area | I-35 corridor, Waco to San Antonio, same flat price | Varies by contractor, often higher outside city limits |
Straight answers
How much does a mini split cost in Schertz?
Most Schertz contractors quote $3,000-$6,000 per zone after an in-home sales visit. Old West Minisplits posts flat prices up front: $2,000 for one zone, $3,700 for two, $5,400 for three. The price includes equipment, labor, line set, electrical, refrigerant, testing, cleanup, and touch-up paint. Exceptions like a long line set or a needed panel upgrade are told up front, never after the fact.
Do I need a furnace if I get a mini split?
No. Mini splits are heat pumps, which means they cool in the summer and heat in the winter. Central Texas winters are mild enough that a mini split can handle the job without a separate furnace. If your existing system is failing, a flat-price new install is often simpler than repairing an old unit.
What if my mini split isn’t cooling properly?
First, check the basics: make sure the unit is powered on, the thermostat is set correctly, and the air filter is clean. If the system is still not cooling, the issue could be low refrigerant, a faulty compressor, or poor installation. If your unit is old or was installed poorly, chasing repairs on an aging system can get expensive. A flat-price new install might be a better long-term solution.
How do I schedule an install?
You can book online through the quote form. We don’t require an in-home sales visit, so you can decide based on the flat price. Once you submit the form, we’ll confirm availability and handle the rest. Same flat pricing applies whether you’re in Schertz, New Braunfels, or anywhere along the I-35 corridor.
Get the number today
No walkthrough, no sales pitch. Tell us the rooms and we'll tell you the price.
Get My Flat Price