Flat-Rate Mini Splits in Temple, Texas, $2,000 Installed
Updated September 2026
If you live in Temple or Bell County, you know how brutal the summers get, and how little relief a window unit or a central AC that can’t reach the garage, casita, or that back bedroom really offers. Older homes, additions, and spaces without ductwork don’t have to stay unbearable. A ductless mini split cools and heats efficiently, quietly, and without the mess of ductwork or the hassle of a high-pressure sales visit.
Most local HVAC contractors want to send a salesperson to your home, measure, and come back with a custom quote that can run $3,000 to $6,000 per zone. Old West Minisplits does it differently: flat pricing, upfront, no surprises. One zone for $2,000, two for $3,700, three for $5,400, equipment, labor, and everything else included. We serve Temple, Killeen, Waco, and the entire I-35 corridor north of Austin with the same honest pricing.
What’s Included in the Flat Price
For $2,000 (one zone), $3,700 (two zones), or $5,400 (three zones), you get a complete mini split system installed, tested, and ready to run. That covers the indoor unit, outdoor condenser, line set up to 25 feet, standard electrical work, refrigerant, and cleanup. We even swing by Home Depot for touch-up paint to match your walls. No trip fees, no add-ons for basic installs, just the system you paid for, working the day we leave.
We tell you upfront if your job might need extra work: a longer line set, a panel upgrade your house already needed, or tricky mounting. Those exceptions are rare in Temple homes, and we’ll explain them before we start, not after.
Common Temple Jobs We Handle
Temple’s mix of older homes, garage apartments, and additions makes mini splits a smart choice. We see a lot of the same setups: a casita or mother-in-law suite that never gets cool, a garage turned into a workshop or bedroom, or a back room that’s always too hot because the ductwork doesn’t reach. Mini splits solve those problems without tearing up walls or adding ductwork.
We also work with homeowners who’ve tried window units and are tired of the noise, the dripping, and the way they block a window. A mini split cools quietly, doesn’t take up floor space, and is far more efficient, so it pays for itself over time, especially with Temple’s electric rates.
Why Flat Pricing Works for Temple
Most local HVAC contractors use a quote-based system. They send a salesperson to your home, measure, and come back with a number that can vary by thousands depending on who’s doing the math. That’s how you end up with a $5,000 quote for a single zone when the same job down the street was $3,500.
Old West Minisplits’s flat pricing means you know the cost before we even show up. No sales visit, no pressure, no surprises. We serve the entire I-35 corridor from Waco to San Antonio with the same honest rates, so whether you’re in Temple, Killeen, or Belton, the price is the same. If your job is straightforward, we’ll tell you. If it’s not, we’ll explain why and what it’ll cost before we start.
How we compare
| Factor | Old West Minisplits | The usual |
|---|---|---|
| Pricing | $2,000 (1 zone), $3,700 (2 zones), $5,400 (3 zones) flat, no surprises | Custom quote, often $3,700–$6,000 per zone, requires in-home sales visit |
| Scheduling | Book online, same flat price whether you’re in Temple or Killeen | Sales visit required, price depends on who shows up and what they measure |
| What’s Included | Equipment, labor, line set, electrical, refrigerant, testing, cleanup, touch-up paint | Base price often excludes electrical, line set, or cleanup, add-ons revealed later |
| Exceptions | Told upfront if your job needs extra work (long line set, panel upgrade, tricky mounting) | Surprise add-ons after the sales visit, often discovered mid-install |
| Service Area | Temple, Bell County, I-35 corridor from Waco to San Antonio, same flat pricing | Pricing varies by location, often higher in smaller towns |
Straight answers
How much does a mini split cost in Temple?
Most local HVAC contractors quote mini splits between $3,000 and $6,000 per zone after an in-home sales visit. Old West Minisplits charges a flat rate: $2,000 for one zone, $3,700 for two, and $5,400 for three. That includes everything, equipment, labor, line set, electrical, refrigerant, testing, cleanup, and even touch-up paint. If your job is straightforward, that’s the price you’ll pay. If it’s not, we’ll tell you upfront what the extra cost will be.
Do mini splits work for Temple’s heat?
Yes. Mini splits are heat pumps, which means they cool in the summer and heat in the winter. They’re designed to handle Central Texas summers, and while our winters are mild, they’ll keep your space comfortable without needing a separate furnace. They’re more efficient than window units and don’t require ductwork, so they’re a good fit for older homes, additions, and spaces where extending ductwork isn’t practical.
How long does an install take?
A typical one-zone install in Temple takes about 4 to 6 hours. Two zones usually take a full day, and three zones might take a day and a half. We’ll give you a clear timeline when you book, and we clean up after ourselves so you can start using the system the same day we finish.
How do I schedule an install?
You can book online through our website. Pick a date and time that works for you, and we’ll confirm within 24 hours. No sales visit, no pressure, just a straightforward process. If you have questions before booking, you can call or email us, and we’ll walk you through it.
Get the number today
No walkthrough, no sales pitch. Tell us the rooms and we'll tell you the price.
Get My Flat Price