Private Salon Suites

Stop sharing the building thermostat with the suite next door

Updated September 2026

A private salon suite is a closed box with dryers, lamps, bodies, and product that the building HVAC never sized for. The hallway thermostat belongs to whoever got there first, and clients feel every swing.

Old West Minisplits posts the price up front, no standoffs. A new one-zone install is $2,000, two zones are $3,700, three zones are $5,400, with four or more quoted individually. Start at /#quote.

$2,000One zone
$3,700Two zones
$5,400Three zones
Installs performed by licensed contractorsMost jobs done in a dayNo trip fees or add-ons

Heat the building never billed you for

Blow dryers, color processors, wax pots, and extra people stack heat in a room the size of a large closet. Shared air also moves odor from next door into your chair, then back out when a door opens.

A ductless mini split is a heat pump that serves your suite alone. It cools through brutal Central Texas summers and handles mild winters without a furnace. You set it for the client in the chair, not for the vacant lobby.

New installs only, with the price on the wall

These flat prices are for new installs only, never repairs or service calls. If a suite unit already exists and has failed, do not read $2,000, $3,700, or $5,400 as a repair figure.

Licensed contractors perform the install. The flat price includes equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, and even a Home Depot run for touch-up paint, with no trip fees or upcharges. Honest exceptions, stated up front: a very long line set, a panel upgrade the space already needed, or unusually difficult mounting. Extra panel work is a licensed electrician's job you arrange separately.

One chair, a wash room, or a small shop

Most single-chair suites need one indoor head at the $2,000 one-zone price. A closed wash room plus a treatment room is often two zones at $3,700. Three zones at $5,400 cover a handful of small rooms in one personal-service shop.

Quiet indoor heads matter for massage, brows, and any service where conversation is the product. You confirm landlord approval for the outdoor condenser before work is scheduled. Old West Minisplits serves Killeen, Temple, Belton, Harker Heights, Copperas Cove, Waco, Salado, Jarrell, and nearby towns. Submit the suite layout at /#quote.

Side by side

How we compare

FactorOld West MinisplitsShared building HVAC
Upfront CostNew install: 1 zone $2,000, 2 zones $3,700, 3 zones $5,400Other ductless jobs in Central Texas commonly run $3,000-$6,000 per zone after a visit, or you keep renting air you cannot set
Who sets the temperatureYou, at the indoor head in your suiteThe landlord, the hallway, or the loudest neighboring tenant
Hours of operationThe heat pump runs while your last client is in the chairBuilding systems often idle after lobby hours
Getting a numberPrice is posted. Use the quote form at /#quoteMost contractors require an in-suite visit before quoting
Questions

Straight answers

Is the $2,000 one-zone price meant for a typical private salon suite?

Yes, for a new install of one zone in a single-room suite. Two zones are $3,700 and three zones are $5,400. These are not repair prices. A very long line set, a panel upgrade the space already needed, or unusually difficult mounting are the exceptions named up front.

Can Old West Minisplits repair the wall unit already in my suite?

No. Flat prices on this site are for new installs only, never repairs or service calls. If that is the job you have, this page does not quote it.

Does a mini split clear chemical odor from color or acrylics?

It conditions the air in your suite. It is not a dedicated exhaust or makeup-air system. If fumes need to be vented, that is a separate trade you arrange. We do not do plumbing, insulation, duct demolition, or roofing.

Will my landlord have to approve the outdoor unit?

Usually yes on a leased suite. You handle landlord permission. Standard mounting is included when the location is workable. Unusually difficult mounting is an exception stated up front, not a surprise on install day. Start with the quote form at /#quote.

Keep reading

Related guides

Get the number today

No walkthrough, no sales pitch. Tell us the rooms and we'll tell you the price.

Get My Flat Price