Senville Ductless Mini Splits Installed at a Flat Price in Austin
Updated September 2026
Old West Minisplits installs Senville ductless mini split heat pumps at posted flat prices across Austin and the I-35 corridor. One zone is $2,000, two zones are $3,700, and three zones are $5,400. That price includes equipment, labor, the line set, standard electrical, refrigerant, testing, cleanup, and a Home Depot run for touch-up paint. There are no trip fees and no surprise add-ons after the quote.
These are complete new installations, priced the same from Waco and Killeen down through Austin to San Antonio. We tell you the honest exceptions before you commit: a very long line set, a panel upgrade the house already needed, or unusually difficult mounting. Everything else is covered in the flat price.
Senville systems fit Central Texas weather
Senville ductless mini splits are heat pumps, which means one system cools your home through brutal Central Texas summers and handles our mild winters without a furnace. They do not need ductwork, so they make sense for older Austin houses, garage apartments, room additions, and any space where running ducts would be expensive or destructive. Senville is a widely available brand with a straightforward lineup of single-zone and multi-zone units. We install the system that matches the number of zones you need at the posted flat price.
What the flat price includes and what we tell you up front
Each flat price includes the Senville equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, and a Home Depot run for touch-up paint. We do not charge a trip fee or add surprise line items after the fact. The only exceptions are the ones we state before you sign: a very long line set, a panel upgrade your house already needed, or unusually difficult mounting. If your job falls into one of those categories, you will know before the work starts, not after.
Flat price new installation versus the usual ductless quote
Ductless installs in Central Texas commonly run $3,000 to $6,000 per zone on a custom quote, and most local HVAC contractors require an in-home sales visit before giving a number. Old West Minisplits posts its prices and keeps the same flat pricing across the entire I-35 corridor from Waco and Killeen down to San Antonio. Window units and portable ACs are cheaper up front, but they cool one room loudly, block a window, drip condensate, and run far less efficiently than a properly installed mini split. For a new installation, the flat price is the whole point: you see the cost before you fill out the quote form.
How we compare
| Factor | Old West Minisplits | The usual |
|---|---|---|
| Price structure | Posted flat price: 1 zone $2,000, 2 zones $3,700, 3 zones $5,400 | Custom quote, usually $3,000-$6,000 per zone for ductless in Central Texas |
| In-home sales visit | Not required to see pricing | Most quote-based contractors require one before giving a number |
| What is included | Equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, paint run | Varies by quote; extras can appear after the visit |
| Trip fees and add-ons | No trip fees, no surprise add-ons | Common in custom quote process; scope varies |
| Service area pricing | Same flat price across Austin and the I-35 corridor to Waco, Killeen, and San Antonio | Pricing often depends on crew, location, and sales visit |
Straight answers
Why are these prices lower than the $3,000-$6,000 per zone I usually hear?
Old West Minisplits is a flat-price installer focused on new Senville ductless installations in the Austin and I-35 corridor. We post pricing and do not build a custom sales process into every job. The tradeoff is a fixed scope: the flat price covers the listed inclusions, and we tell you up front if a job needs a very long line set, a panel upgrade, or unusually difficult mounting.
What happens if my install has an exception?
You will know before the work starts, never after. The only exceptions are a very long line set, a panel upgrade the house already needed, or unusually difficult mounting. Otherwise the flat price covers the equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, and the touch-up paint run.
Do I need a furnace or backup heat in Austin?
No. A Senville mini split is a heat pump, so it cools and heats. It handles Central Texas winters without a furnace.
Does Old West Minisplits repair existing mini splits?
No. Old West Minisplits provides flat-price new installation. If an existing system is old, failing, or was poorly installed, a flat-price new install quote is often a better comparison than chasing repairs on an aging unit. For general troubleshooting, check the breaker, clean the filters, and make sure the outdoor unit is clear of debris before contacting a service company. Old West Minisplits does not offer appliance repair, warranty service, or maintenance contracts.
Get the number today
No walkthrough, no sales pitch. Tell us the rooms and we'll tell you the price.
Get My Flat Price