Oak Hill Ductless Mini Splits for $2,000, Flat Price, No Surprises
Updated September 2026
Oak Hill summers hit hard, and if your house wasn’t built with ductwork, or your garage, casita, or addition wasn’t, you’re stuck with window units that block your view and drip on the porch. Mini splits are the quiet, efficient fix, but most local HVAC contractors want to send a salesperson to your door for a custom quote that’ll run $3,000-$6,000 per zone.
Old West Minisplits does it different. We post flat prices up front: $2,000 for one zone, $3,700 for two, $5,400 for three. That covers the equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, and even a Home Depot run for touch-up paint. No trip fees, no surprise add-ons. Just honest pricing for Oak Hill homes, whether you’re cooling a master bedroom, a garage workshop, or a whole casita.
What’s Included in the Flat Price
Every Old West Minisplits install covers the same things, no matter if you’re in Oak Hill or down the I-35 corridor. The $2,000 single-zone price includes a 12,000-24,000 BTU heat pump unit, wall-mounted indoor head, up to 25 feet of line set, standard electrical work (like a new 20-amp circuit if your panel has space), refrigerant, testing, and cleanup. We’ll even grab a quart of paint from Home Depot to match your wall where the line set goes in.
We tell you up front about the rare exceptions: a very long line set, a panel upgrade your house already needed, or unusually difficult mounting. Those are the only things that could add cost, and we’ll let you know before you commit, not after.
Typical Oak Hill Jobs
Most Oak Hill homes we see fit into three buckets. The first is the garage or workshop that’s too hot to use half the year. A single-zone $2,000 install turns it into a usable space without the noise and hassle of a window unit. The second is the casita or mother-in-law suite that’s never had ductwork. A two-zone $3,700 system cools the main room and bedroom separately, so you’re not wasting energy on empty space. The third is the older home where the existing ductwork is shot or nonexistent. A three-zone $5,400 install covers the main living areas without tearing up walls or floors.
Mini splits are heat pumps, so they handle Oak Hill’s mild winters too. No need for a separate furnace, just set it to heat and forget it.
Why Flat Price Works Better
Most local HVAC contractors treat mini splits like a custom job. They’ll send a salesperson to your house, measure everything, and come back with a quote that’s $3,000-$6,000 per zone. That’s fine if you’ve got the time and patience for it, but it’s not the only way.
Old West Minisplits’s flat pricing is for homeowners who want a fair price up front, no sales visit, and no surprises. We serve Austin and the I-35 corridor from Waco to San Antonio, and the price is the same everywhere. If your job fits the standard setup, you’ll know the cost before you even fill out the form.
How we compare
| Factor | Old West Minisplits | The usual |
|---|---|---|
| Pricing | $2,000 for 1 zone, $3,700 for 2, $5,400 for 3. Posted online, no surprises. | $3,000-$6,000 per zone. Custom quote after in-home sales visit. |
| Scheduling | Book online, no salesperson needed. Same flat price corridor-wide. | Requires in-home visit to get a quote. Price varies by location and job complexity. |
| What’s Included | Equipment, labor, line set, standard electrical, refrigerant, testing, cleanup, touch-up paint. | Varies by contractor. Often extra charges for electrical, line set, or cleanup. |
| Exceptions | Long line sets, panel upgrades, difficult mounting. Told up front, never after. | Often discovered mid-job, leading to change orders and higher costs. |
| Service Area | Austin and I-35 corridor, north to Waco/Killeen, south to San Antonio. Same flat price. | Local service areas vary. Pricing often higher outside major cities. |
Straight answers
How much does a mini split cost in Oak Hill?
Most local HVAC contractors charge $3,000-$6,000 per zone after a custom quote. Old West Minisplits posts flat prices: $2,000 for one zone, $3,700 for two, $5,400 for three. That includes everything except rare exceptions like a very long line set or a panel upgrade your house already needed.
Do mini splits work in Central Texas winters?
Yes. Mini splits are heat pumps, so they provide both cooling and heating. They handle Oak Hill’s mild winters easily and are far more efficient than running a furnace or space heaters. If your system is struggling in the cold, it might be undersized or poorly installed, often a good reason to get a flat-price new install quote instead of chasing repairs.
What if my job needs extra work?
We’ll tell you up front if your job needs something outside the flat price, like a longer line set, a panel upgrade, or unusually difficult mounting. Those are the only things that could add cost, and we’ll let you know before you commit. Most Oak Hill jobs fit the standard setup without extras.
How do I schedule an install?
Fill out the quote form on this page. We’ll confirm your job fits the flat-price setup and get you on the schedule. No sales visit, no in-home quote, just a straightforward process for Oak Hill homeowners who want a fair price up front.
Get the number today
No walkthrough, no sales pitch. Tell us the rooms and we'll tell you the price.
Get My Flat Price